Supero SuperWorkstation 7044A-32, User Manual

Page: 49 / 124

Chapter 5: Advanced Serverboard Setup
5-15
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and PS/2
mouse are located on J9. See the
table at right for pin defi nitions. (See
Figure 5-3 for the locations of each.)
Serial Ports
The COM1 and COM2 serial ports
are located under the parallel port.
See the table on the right for pin
defi nitions.
GLAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (desig-
nated LAN1 and LAN2) are located
on the I/O backplane. These ports
accept RJF1 type cables.
Universal Serial Bus
(USB0/1)
There are eight USB 2.0 (Universal
Serial Bus) ports/headers on the
serverboard. Four of them are back
panel USB ports (USB0-3) and the
other four are front panel USB head-
ers (USB4/5 and USB6/7). See the
tables on the right for pin defi nitions.
Back Panel USB
(USB0/1/2/3)
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 N/A
Front Panel USB
Pin Defi nitions (USB4/5)
USB4
Pin # Defi nition USB5
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 No connection
Front Panel USB
(USB6/7)
Pin# Defi nition
1 Vcc
2 Data-
3 Data+
4 Ground
5 NA
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
PS/2 Keyboard and
Mouse Port Pin
Defi nitions
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC