Supero SuperServer 7043L-8R, User Manual

Page: 40 / 114

5-6
S
UPER
S
ERVER 7043L-8R Manual
Figure 5-3. JF1/JF2 Header Pins
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See
Figure 5-3 for the pin locations of the various front control panel buttons
and LED indicators. All JF1 wires have been bundled into single ribbon
cable to simplify their connection. Make sure the red wire plugs into pin 1
as marked on the motherboard. The other end connects to the Control Panel
printed circuit board, located just behind the system status LEDs in the
chassis. See the Connector Definitions section in this chapter for details
and pin descriptions of JF1.
JF2 is an additional row of headers that provides connectors for additional
functions, as noted below.
1 2
HD LED
15 16
Power LED
X
Chassis Intrusion
Speaker
JF2
Power Button
Overheat LED
1
NIC1 LED
Reset Button
2
Power Fail LED
NIC2 LED
HDD LED
Power LED
Reset
Pwr
Vcc
Vcc
Vcc
Vcc
Vcc
Ground
Ground
19 20
Vcc
X
Ground
NMI
X
JF1