Supero SuperServer 7034L-i, User Manual

Page: 10 / 110

1-2
S
UPER
SERVER
7034L-i User's Manual
1-2 Serverboard Features
At the heart of the 7034L-i lies the X6DLP-EG2, a dual processor serverboard based
on Intel's E7520 chipset and designed to provide maximum performance. Below
are the main features of the X6DLP-EG2.
Processors
The X6DLP-EG2 supports single or dual Intel
®
Xeon
®
LV or ULV processors in
479-pin PGA sockets. Please refer to our web site for a complete listing of sup-
ported processors (www.supermicro.com).
Memory
The X6DLP-EG2 has four (4) 240-pin DIMM sockets that can support up to 16 GB
of registered ECC DDR2-400 SDRAM. The memory bus is a dual-channel confi gu-
ration and memory modules must be installed in pairs (two at a time). All memory
modules used to populate the system should be the same size, type and speed.
Serial ATA
The 6300ESB South Bridge portion of the chipset includes a Serial ATA controller
that supports a two-port SATA subsystem (RAID 0 and 1 supported). The Serial
ATA drives are not hot-swappable units as no SATA backplane is included in the
7034L-i.
PCI Expansion Slots
The X6DLP-EG2 has two 64-bit, 66 MHz (3.3V) PCI-X slots, one x8 PCI-Express
slot and one 32-bit, 33 MHz (5V) PCI slot. All four slots may be populated with
expansion cards in the 7034L-i. (Please note that the x8 PCI-Express slot in line
with slot #6 was designed for use in a 1U chassis and cannot be used in a tower
confi guration. For this reason, this slot will not be mentioned in this manual.)
Ethernet Ports
The X6DLP-EG2 has one Intel 82573V and one Intel 82573L single port Ethernet
controllers to support two Gigabit LAN ports. (Supports 100/1000 BASE-T, RJ45
output.)