Supero SuperServer 6123L-8R, User Manual

Page: 79 / 105

7-6
S
UPER
S
ERVER 6123L-8R/6123L-iR User's Manual
DMA Mode
Select the default setting of Auto to allow the BIOS to auto detect the DMA
mode. Use this value if the IDE disk drive support cannot be determined. Other-
wise, select from one of the following options: SWDMA0 (Single Word DMA mode
0, 2.1 MBs data transfer rate), SWDMA1 (Single Word DMA mode 1, 4.2 MBs
data transfer rate), SWDMA2 (Single Word DMA mode 2, 8.3 MBs data transfer
rate), MWDMA0 (Multi Word DMA mode 0, 4.2 MBs data transfer rate), MWDMA1
(Multi Word DMA mode 1, 13.3 MBs data transfer rate), MWDMA2 (Single Word
DMA mode 2, 16.6 MBs data transfer rate), UDMA0 (Ultra DMA mode 0, 16.6
MBs data transfer rate), UDMA0 (Ultra DMA mode 0, 16.6 MBs data transfer
rate), UDMA1 (Ultra DMA mode 1, 25 MBs data transfer rate), UDMA2 (Ultra
DMA mode 2, 33.3 MBs data transfer rate), UDMA3 (Ultra DMA mode 3, 66.6
MBs data transfer rate) or UDMA4 (Ultra DMA mode 4, 100 MBs data transfer
rate).
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select " Auto " to allow BIOS to auto detect hard disk
drive support. Select "Disabled" to prevent the BIOS from using the S.M.A.R.T.
Select "Enabled" to allow the BIOS to use the S.M.A.R.T. to support hard drive
disk.
32-Bit Data Transfer
Select " Enabled " to activate the 32-Bit data transfer function. Select "Disabled"
to deactivate the function.
ARMD Emulation Type
This feature allows the BIOS to set the ARMD Emulation type. The options are
"Auto" , "Floppy" and "Hard Disk."
ATA(PI) Detect Time Out
The feature allows BIOS to set the time out value for detecting ATA(PI) devices.
The options are "0", "5" , "10", "15", "20", "25" and "30."