Supero SuperServer 6037R-72RFT User Manual Download Page 90

Page: 90 / 102

7-24

UPER

ERVER 6037R-72RFT User's Manual

7-4 Event Logs

Use this menu to confi gure Event Log settings.



Change SmBIOS Event Log Settings

Enabling/Disabling Options

Smbios Event Log

Change this item to enable or disable all features of the Smbios Event Logging

during boot. The options are

Enabled

and Disabled.

Erasing Settings

Erase Event Log

This option erases all logged events. The options are

, Yes, Next reset, and

Yes, Every reset.

When Log is Full

This option automatically clears the Event Log memory of all messages when it is

full. The options are

Do Nothing

and Erase Immediately.

Log System Boot Event

This option toggles the System Boot Event logging to enabled or disabled. The

options are

Disabled

and Enabled.

Summary of Contents for SuperServer 6037R-72RFT







































































































Search results

Summary of Contents for SuperServer 6037R-72RFT

Reviews:

Related manuals for SuperServer 6037R-72RFT

Brands by name

Popular brands

Supero SuperServer 6037R-72RFT, User Manual

Search results

Summary of Contents for SuperServer 6037R-72RFT

Reviews:

Related manuals for SuperServer 6037R-72RFT

Brands by name

Popular brands