Supero SuperServer 6028U Series, User Manual

Page: 59 / 122

Chapter 5: Advanced Serverboard Setup
5-15
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 PWR LED
NIC1/NIC2 LED
The NIC (Network Interface Controller)
LED connections for GLAN port 1 are
located on pins 11 and 12 of JF1, and
the LED connection for GLAN Port 2
are on pins 9 and 10. Attach the NIC
LED cables here to display network
activity. Refer to the table on the right
for pin definitions.
Note: The NIC LED connections for
10G_LAN Ports 3/4 is located on
LED1.
GLAN 1/2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
10 NIC 2 Link LED
11 NIC 1 Activity LED
12 NIC 1 Link LED
HDD LED/UID Switch
The HDD LED/UID switch connections
are located on pins 13/14 of JF1.
Attach an LED cable to display HDD
activity. Attach a cable to pin 13 to use
UID button. See the table on the right
for pin definitions.
HDD/UID Switch
Pin Definitions (JF1)
Pin# Definition
13 UID Switch
14 HDD Active