Supero SUPERSERVER 6028TP-HTFR, User Manual

Page: 103 / 141

7-8
SUPERSERVER 6028TP-HTR/HTTR/HTFR USER'S MANUAL
X2 APIC (Advanced Programmable Interrupt Controller)
Based on Intel's Hyper-Threading architecture, each logical processor (thread) is
assigned 256 APIC IDs (APIDs) in 8-bit bandwidth. When this feature is set to En-
able, the APIC ID will be expanded (X2) from 8 bits to 16 bits to provide 512 APIDs
to each thread to enhance CPU performance. The options are
Disable and Enable.
AES-NI
Select Enable to use the Intel Advanced Encryption Standard (AES) New Instruc-
tions (NI) to ensure data security. The options are Enable and
Disable .
Intel Virtualization Technology
Select Enable to use Intel Virtualization Technology support for Direct I/O VT-d sup-
port
by reporting the I/O device assignments to the VMM (Virtual Machine Monitor)
through the DMAR ACPI tables. This feature offers fully-protected I/O resource
sharing across Intel platforms, providing greater reliability, security and availability
in networking and data-sharing. The options are
Enable and Disable.

Advanced Power Management Configuration
Advanced Power Management Configuration
Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to custom -
ize system power settings. Select Disabled to disable power-saving settings. The
options are Disable,
Energy Efficient , and Custom.
If the option is set to Energy Efficient or Custom, the following items will display:
Config TDP (Configuring Thermal Design Power)
Select Enable to configure TDP power settings to enhance thermal management.
The options are Enable and Disable .
Config TDP Level (Available when Config TDP above is set to Enable)
Use this item to set TDP configuration level to enhance thermal management.
The options are Nominal , Level 1, and Level 2.

CPU P State Control (Available when Power Technology
is set to Custom)
EIST (P-states)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency to reduce power consumption and
heat dissipation. The options are Disable and
Enable .