Supero SUPERSERVER 6028TP-HC1FR, User Manual

Page: 77 / 140

Chapter 6: Advanced Chassis Setup
6-3
6-3 Chassis Cover
Before operating the chassis for the first time, it is important to remove
the protective film covering the top of the chassis, in order to allow for proper
ventilation and cooling.
Removing the Chassis Cover and Protective Film (Figure 6-2)
1. Remove the two screws which secure the top cover onto the chassis as
shown above.
2. Lift the top cover up and off the chassis.
3.
Peel off the protective film covering the top cover and the top of the chassis
4. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
Figure 6-2. Removing the Chassis Cover
Caution: Except for short periods of time, do NOT operate the server without
the cover in place. The chassis cover must be in place to allow proper airflow
and prevent overheating.
Remove two screws
Check Ventilation
Openings
1
2
1
3
1
4
1
1