5-18
S
UPER
S
ERVER 6027B-URF User's Manual
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for an
external speaker. See the table on the
right for speaker pin de
fi
nitions.
Note
: The speaker connector pins are
for use with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
Overheat/Fan Fail LED
Connect an LED to the JOH1 header
to provide warning of a chassis over-
heating condition. When solid this
LED indicates an overheat condition
and when blinking indicates a fan
failure. See the table on the right for
pin de
fi
nitions.
Overheat/Fan Fail LED
Pin Defi nitions
Pin# De
fi
nition
1
+5V
2
OH Active
SGPIO
The two headers labeled T-SGPIO-1
and T-SGPIO-2 are for SGPIO (Se-
rial General Purpose Input/Output).
SGPIO supports serial link interfaces
for the onboard SATA ports. Connect
the appropriate cables from the back-
plane to the SGPIO1 and SGPIO2
headers to utilize SATA management
functions on your system.
SGPIO Headers
Pin Defi nitions
Pin# De
fi
nition Pin # De
fi
nition
1
NC
2
NC
3
Ground
4
Data
5
Load
6
Ground
7
NC
8
NC
Note:
NC indicates no connection.
IPMB
A System Management Bus header for
IPMI 2.0 is located at JIPMB. Connect
the appropriate cable here to use the
IPMB I
2
C connection on your system.
IPMB Header
Pin Defi nitions
Pin# De
fi
nition
1
Data
2
Ground
3
Clock
4
No Connection
Speaker Connector
Pin Settings
Pin Setting De
fi
nition
Pins 4-7
External Speaker
Pins 6-7
Internal Speaker
PWR LED Connector
Pin Defi nitions
Pin Setting De
fi
nition
Pin 1
Anode (+)
Pin2 Cathode
(-)
Pin3
NA
Summary of Contents for SUPERSERVER 6027B-URF
