Supero SuperServer 6025B-8, User Manual

Page: 66 / 122

6-6
S
UPER
S
ERVER 6025B-T/6025B-8 User's Manual
Figure 6-4. Removing an SATA/SCSI Drive Carrier
!
Important: All of the SATA/SCSI drive carriers must remain in the
drive bays to maintain proper cooling airfl ow.
Release Button
Handle
2. Installing/removing hot-swap SATA/SCSI drives
The SATA/SCSI drive carriers are all easily accessible at the front of the chassis.
These hard drives are hot-pluggable, meaning they can be removed and installed
without powering down the system. To remove a carrier, push the release button
located beside the drive LEDs. Then swing the colored handle fully out and use it
to pull the unit straight out (see Figure 6-4).
Note: Your operating system must have RAID support to enable the hot-plug ca-
pability of the SATA/SCSI drives.