Supero SUPERSERVER 6015TC-LFT, User Manual

Page: 81 / 96

Chapter 4: BIOS
7-17
X
Hardware Monitoring
CPU Temperature Threshold
This option allows the user to select the CPU Overheat Alarm setting which deter-
mines when the CPU overheat alarm will be activated to provide warnings of pos-
sible CPU overheat. The options are Tcontrol, T5
0
C , and T10
0
C.
Highlight this and hit <Enter> to see the display of the following items:
CPU1 Temperature/CPU2 Temperature/System Temperature
Fan1-Fan3:
If the feature of Auto Fan Control is enabled, the BIOS will automatically display
the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative.The fan
speed is controlled by Pulse Width Modulation (PWM). Select Workstation if your
system is used as a Workstation. Select Server if your system is used as a Server.
Select Disable to disable fan speed control and allow the onboard fans to constantly
run at full speed (12V). The Options are: 1. Full-Speed at 12V , 2. Optimized Server
(w/4-pin), and 3. Optimized Workstation (w/4-pin).
Voltage Monitoring
The following items will be monitored and displayed:
VcoreA, VcoreB, 12V, 1.8V, 5V, +3.3V, +3.3Vsb, and Vbatt.
Note: In the Windows OS environment, the Supero Doctor III settings take prece-
dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.