Supero SUPERSERVER 6015TC-LFT, User Manual

Page: 3 / 96

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6015TC-LFT. In-
stallation and maintenance should be performed by experienced technicians only.
The SuperServer 6015TC-LFT is a 1U Twin (two serverboards in a 1U chassis) rack-
mount server based on the SC808T-780B server chassis and two Super X7DCT-LF
serverboards. X7DCT-LF supports dual Intel® Xeon® 5400/5300/5200/5100 Series
processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7DCT-LF serverboard
and the SC808T-780B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015TC-LFT
into a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6015TC-LFT.
iii
Preface