Supero SUPERSERVER 6014P-T, User Manual

Page: 82 / 124

7-10
S
UPER
S
ERVER 6014P-T/6014P-TR User's Manual
Discrete MTRR Allocation
If enabled, MTRRs (-Memory Type Range Registers) are confi gured as distinct,
separate units and cannot be overlapped. Select enabled to enhance graphic
performance when you use a Linux graphics driver that requires write-combining
with 4GB or more memory. The options are Enabled and Disabled .
PCI Confi guration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN (Gigabit- LAN) OPROM Confi gure
Enabling this option provides the capability to boot from GLAN. The options
are Disabled and Enabled.
.
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD)
area. The options are Yes and No .
Frequency for PCIX#1/GLAN
This option allows the user to change the bus frequency for the devices installed
in the slot indicated. The options are Auto , PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Frequency for PCIX#2/MASS
This option allows the user to change the bus frequency of the devices installed
in the slot indicated. The options are Auto , PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
PCI-X 100MHz Slot#1, PCI-X 100MHz Slot#2 w/ZCR, PCI-Express
x8 Slot#1, PCI-Express x8 Slot#2
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The
options are Enabled and Disabled.