Supero SUPERSERVER 5018R-M, User Manual

Page: 92 / 130

7-10
S
UPER
S
ERVER 5018R-M/5018R-MR User's Manual
Enhanced Halt State
(
C1E)
Select Enabled to enable "Enhanced Halt State" support, which will significantly
reduce the CPU's power consumption by minimizing CPU's clock cycles and
voltage use during a "Halt State." The options are Disable and
Enable
.

CPU T State Control
ACPI (Advanced Configuration Power Interface) T-States
If this item is set to Enable, CPU throttling will be supported by the operating
system to reduce power consumption. The options are
Enable and Disable.

CPU Advanced PM Tuning

Energy Perf BIAS
Energy Performance Tuning
When enabled, this item selects whether the BIOS or Operating System can
turn on the energy performance bias tuning. The options are Enable and
Disable .
Energy Performance BIAS Setting
This feature allows balancing Power Efficiency vs Performance. This will
override whatever setting is in the Operating System. The options are Per-
formance,
Balanced Performance , Balanced Power, and Power.
Power/Performance Switch
This feature allows dynamic switching between Power and Performance
power efficiency. The options are
Enabled
, and Disabled.
Workload Configuration
This feature allows for optimization of workload Balanced is recommended.
The options are
Balanced and I/O Sensitive.
Averaging Time Window
This feature is used to control the effective window average for C0 and P0
times. Enter a numeric values using the keyboard.
P0 TotalTimeThreshold Low
The hardware switching mechanism will disable the performance setting when
the total P0 time is less than this threshold. Enter a numeric value.