Supero SUPERSERVER 5017C-MTF, User Manual

Page: 34 / 94

5-2
S
UPER
S
ERVER 5017C-MTF/5017C-MTRF User's Manual
5-2 Processor and Heatsink Installation
Notes:
Always connect the power cord last and always remove it before adding, re-
•
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
•
directional heatsink only.
Make sure to install the motherboard into the chassis before you install the
•
CPU heatsinks.
When receiving a motherboard without a processor pre-installed, make sure that
•
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
Refer to the Supermicro web site for updates on CPU support.
•
Installing the LGA1155 Processor
Press the load lever to release the load plate, which covers the CPU socket, 1.
from its locked position.
Gently lift the load lever to open the load plate. Remove the plate cap. 2.
Load Lever
Load Plate