Supero SuperServer 5013G-M, User Manual

Page: 39 / 104

Chapter 5: Advanced Motherboard Setup
5-5
5-5 Installing Processors
Avoid placing direct pressure to the top of the processor
package. Always remove the power cord first before adding,
removing or changing any hardware components.
Processor Support
The P4SGE has one 478-pin microPGA socket, which supports Intel Pentium
4 processors of up to 3.06 GHz with a 512KB integrated Advanced Trans-
fer Cache or single Intel Celeron processors of up to 2.20 GHz with a
128KB integrated Advanced Transfer Cache
!
1. Lift the lever on the CPU socket.
2. Install the CPU in the socket. Make
sure that Pin 1 of the CPU is seated on
Pin 1 of the socket (both corners are
marked with a triangle).
3. Press the lever down until you hear
it *click* into the locked position.
4. Apply the proper amount of thermal
compound to the CPU die. Place the
heatsink on top of the CPU and press
firmly downward - do not twist or slide
the heatsink to seat the thermal com-
pound.
5. Secure the heat sink by locking the
retention clips into their proper position.