Supero SUPERSERVER 1028GR-TR, User Manual

Page: 93 / 130

Chapter 7: AMI BIOS
7-9
No PCIe Port Active ECO
This item provides a workaround solution when there is no PCIe port active.
The options are Reset the SQ FLOP by CSR Option and
PCU Squelch Exit
Ignore Option .

Socket 0 PCIED00F0 Port 0/DMI
This submenu allows the user to configure the settings for the following PCI-E
prots: 0, 1A, 1B, 2A, 2B, 2C, 2D, 3A, 3B, 3C, and 3D.
Link Speed
Use this item to configure the link speed of a PCI-E device installed on the PCI-E
slot specified by the user. The options are Gen1, Gen2, and
Gen3 .
PCI-E Port DeEmphasis
DeEmphasis is used to decrease the magnitude of very high frequencies in
relation to the magnitude of very low frequencies to improve the overall signal-
to-noise ratio by reducing the level of all (signals) data bits transmitted except the
first one, acting as a form of transmitter equalization to enhance signal transmis -
sion and audio performance. The options are -3.5 dB and -6.0 dB .
PCI-E Port L0s Exit Latency
Use this item to configure the exit latency of the PCI-E port L0s link state, measur -
ing the length of time needed to transition from the L0s link state to L0. The avail-
able latency option is 4uS - 8uS. (Note: "uS" is a stand-in for "microseconds.")
PCI-E Port L1 Exit Latency
Use this item to configure the exit latency of the PCI-E port L1 link state, measur -
ing the length of time needed to transition from the L1 link state to L0. The latency
options are <1uS, 1uS - 2uS, 2uS - 4uS, 4uS - 8uS,
8uS - 16uS , 16uS - 32uS,
32uS - 64uS, >64uS. (Note: "uS" is a stand-in for "microseconds.")
Fatal Err Over (Fatal Error Overwrite)
This item configures the option to overwrite fatal errors. The options are Dis-
able and Enable.
Non-Fatal Err Over (Non-Fatal Error Overwrite)
This item configures the option to overwrite non-fatal errors. The options are
Disable and Enable.