Supero Supero X9SKV-1105, User Manual

Page: 85 / 95

Appendix A: POST Error Beep Codes
A-1
Appendix A
POST Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the cor-
responding errorRecoverable POST Error Beep Codes
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps Memory Error No memory detected in the system
5 beeps No con-in or no con-out
devices
Con-In: USB keyboard, PCI or Se-
rial Console Redirection, IPMI KVM
or SOL
Con-Out: Video Controller, PCI or
Serial Console Redirection, IPMI
SOL
1 beep per device Refresh 1 beep for each USB device
X9 IPMI Error Codes
1 continuous
beep
System OH System Overheat