Supero Supero X9DBS-F User Manual Download Page 85

Page: 85 / 99

Chapter 4: AMI BIOS

4-25

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state

4-4 Event Logs

Use this feature to configure Event Log settings.



Change SMBIOS Event Log Settings

This feature allows the user to configure SMBIOS Event settings.

Enabling/Disabling Options

SMBIOS Event Log

Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are

Enabled

and Disabled.

Summary of Contents for Supero X9DBS-F




































































































Search results

Summary of Contents for Supero X9DBS-F

Reviews:

Related manuals for Supero X9DBS-F

Brands by name

Popular brands

Supero Supero X9DBS-F, User Manual

Search results

Summary of Contents for Supero X9DBS-F

Reviews:

Related manuals for Supero X9DBS-F

Brands by name

Popular brands