Supero Supero X9DBS-F, User Manual

Page: 47 / 99

Chapter 2: Installation
2-23
Fan 6
Fan 5
Fan 4
JPL1
LAN1
LAN2
JKVM1
VGA/USB/COM1
External SAA
D95
Slot1 PCI-E 3.0x24
CPU2 Port1
CPU2 Port3
JPI2C2
JPI2C1
JPLD1
JDBS5
BIOS
JBT1
PCH
USB3
I-SA
TA0
I-SA
TA1
JSD1 JSD2
JWD1
P2-DIMMD1 P2-DIMME1 P2-DIMMF1
JPME1
JPME2
Fan1
Fan2
Fan3
JTPM1
LED2
Battery
LED10JOH1
M13
M9 M8 M7
M6
M4
M3
M2
M1
LE2
LED1
1
J21
LED13 LED12
P1-DIMMA1
P1-DIMMB1 P1-DIMMC1
BMC
SAS
Re-Driver
SAS MEZZAN
INE HEADER
CPU1
CPU2
X9DBS-F
Rev. 1.01
LAN
Intel i350
SAS
Re-Driver
CMOS Clear
JBT1 is used to clear CMOS. Instead of pins, this "jumper" consists of contact pads
to prevent accidental clearing of CMOS. To clear CMOS, use a metal object such
as a small screwdriver to touch both pads at the same time to short the connec-
tion. Always remove the AC power cord from the system before clearing CMOS.
Note 1. For an ATX power supply, you must completely shut down the
system, remove the AC power cord, and then short JBT1 to clear CMOS.
Note 2. Be sure to remove the onboard CMOS Battery before you short
JBT1 to clear CMOS. Clearing CMOS will also clear all passwords.
A. Clear CMOS
B. GLAN 1/2 Enable
A
GLAN Enable/Disable
JPL1 enables or disables the GLAN
Ports 1/2 on the motherboard. See the
table on the right for jumper settings.
The default setting is Enabled.
GLAN Enable
Jumper Settings
Jumper Setting Definition
1-2 Enabled (default)
2-3 Disabled
B