manualshive.com logo in svg

Supero SUPERO SuperServer 6026TT-H6IBQRF, User Manual, Page: 83 / 110

Share
Download
Supero SUPERO SuperServer 6026TT-H6IBQRF User Manual Download Page 83

Chapter 7: BIOS

7-11

USB 2.0 Controller

Select Enabled to activate the onboard USB 2.0 controller. The options are 

Enabled

 and Disabled.

USB 2.0 Controller Mode

This setting allows you to select the USB 2.0 Controller mode. The options are 

Hi-Speed (480 Mbps

) and Full Speed (12 Mbps). 

BIOS EHCI Hand-Off

Select Enabled to enable BIOS Enhanced Host Controller Interface support to 

provide a workaround solution for an operating system that does not have EHCI 

Hand-Off support. When enabled, the EHCI Interface will be changed from the 

BIOS-controlled to the OS-controlled. The options are Disabled and 

Enabled

.

IDE/SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence 

of the IDE devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-

lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled, 

Compatible

 and Enhanced.

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are 

IDE, 

RAID

 

and AHCI. (When the option-RAID is selected, the item-ICH RAID 

Code Base will appear. When the option-AHCI is selected, the item-SATA AHCI 

will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is 

selected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID 

settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure 

Adaptec's SATA RAID settings. The options are 

Intel 

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected)

Select Enable to enable the function of Serial ATA Advanced Host Interface. 

(Take caution when using this function. This feature is for advanced programmers 

only.) The options are Enabled and 

Disabled

. If the option-Enabled is selected, 

the following item will display.

Summary of Contents for SUPERO SuperServer 6026TT-H6IBQRF















































































































Reviews:

No comments