Supero SUPERO SuperServer 6026TT-H6IBQRF, User Manual

Page: 13 / 110

Chapter 1: Introduction
1-3
Ethernet Ports
An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).
Onboard Controllers/Ports
Onboard I/O backpanel ports on each serverboard include one COM port, a VGA
port, two USB ports, a dedicated IPMI LAN port and two Gigabit LAN (NIC) ports.
An Infi niBand port is also included on the X8DTT-H6IBXF/-H6IBQF serverboards
(the 6026TT-H6IBXRF and 6026TT-H6IBQRF servers only). Up to four USB 2.0
(Universal Serial Bus) connections (2 Rear USB Ports and 1 Type A Header w/2
USB connections supported) are on each of the servers. There are four sets of
I/O ports included in the server (one set for each serverboard).
Graphics Controller
The X8DTT-HEF+/HIBXF+/HIBQF+ features an integrated Matrox G200eW
graphics chip, which includes 8 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include voltage monitors, auto-
switching voltage regulators, chassis and CPU overheat sensors, virus protection
and BIOS rescue.
Infi niBand
Both the 6026TT-H6IBXRF and 6026TT-H6IBQRF servers include an Infi niBand port
at DDR (dual data rate) and QDR (quad data rate) speeds, respectively. Infi niBand
is a scalable serial communications link intended for connecting processors with
high-speed peripherals. (Infi niBand requires a QSFP connector.)