Supero Supero SuperServer 5016I-T User Manual Download Page 70

Page: 70 / 98

7-4

UPER

ERVER 5016I-T/5016I-TF User's Manual

7-3 Advanced Setup Confi gurations

Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu

items:

BOOT Feature

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time needed

for system boot. The options are

Enabled

and Disabled.

Quiet Boot

This option allows the bootup screen options to be modifi ed between POST mes-

sages or the OEM logo. Select Disabled to display the POST messages. Select

Enabled to display the OEM logo instead of the normal POST messages. The op-

tions are

Enabled

and Disabled.

AddOn ROM Display Mode

This sets the display mode for Option ROM. The options are

Force BIOS

and

Keep Current.

Bootup Num-Lock

This feature selects the Power-on state for Numlock key. The options are Off

and

PS/2 Mouse Support

This feature enables support for the PS/2 mouse. The options are Disabled,

Enabled and

Auto.

Summary of Contents for Supero SuperServer 5016I-T



































































































Search results

Summary of Contents for Supero SuperServer 5016I-T

Reviews:

Brands by name

Popular brands

Supero Supero SuperServer 5016I-T, User Manual

Search results

Summary of Contents for Supero SuperServer 5016I-T

Reviews:

Brands by name

Popular brands