manualshive.com logo in svg

Supero Supero SuperServer 5016I-T, User Manual

Share
Download
Supero Supero SuperServer 5016I-T User Manual Download Page 69

Chapter 7: BIOS

7-3

When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen. 

You can always return to the Main setup screen by selecting the Main

 

tab on the 

top of the screen. The Main BIOS Setup screen is shown below.

System Overview:

 The following BIOS information will be displayed:

System Time/System Date 

Use this option to change the system time and date. Highlight 

System Time 

or 

Sys-

tem Date 

using the arrow keys. Enter new values through the keyboard. Press the 

<Tab> key or the arrow keys to move between fi elds. The date must be entered in 

Day MM/DD/YY format. The time is entered in HH:MM:SS format. (

Note: 

The time 

is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)

Supermicro X8SIL/X8SIL-F

Version

Build Date

Processor

The AMI BIOS will automatically display the status of processor as shown below:

Type of Processor

Speed

Physical Count

Logical Count

System Memory 

This displays the size of memory available in the system:

Summary of Contents for Supero SuperServer 5016I-T



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands