background image

M35S and M35T1 Mobile Rack User's Guide

ii

Manual 

Revision 

1.0a 

      

Release Date: August 6, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.  
The vendor assumes no responsibility for any inaccuracies that may be contained in this document, 
makes no commitment to update or to keep current the information in this manual, or to notify any 
person or organization of the updates.  

Please Note:  For the most up-to-date version of this 

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product 
described in this manual at any time and without notice.  This product, including software and 
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a 
license. Any use or reproduction of this product is not allowed, except as expressly permitted by 
the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, 
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO 
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES.  IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY 
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE 
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH 
HARDWARE, 

SOFTWARE, 

OR 

DATA. 

     

 

 

 

 

 

 

 

 

 

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa 
Clara County in the State of California, USA.  The State of California, County of Santa Clara shall 
be the exclusive venue for the resolution of any such disputes.  Super Micro's total liability for all 
claims will not exceed the price paid for the hardware product.          

 

 

 

 

 

 

 

 

 

 

 

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate 
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate 
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this 
product may expose you to lead, a chemical known to 
the State of California to cause birth defects and other 
reproductive harm. 

Unless you request and receive written permission from Super Micro Computer, Inc., you may not 
copy any part of this document.

Information in this document is subject to change without notice.  Other products and companies 
referred to herein are trademarks or registered trademarks of their respective companies or mark 
holders.

Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

Summary of Contents for Supero M35S




























Reviews: