Supero SUPER P6DLF, User Manual

Page: 44 / 66

2-16
SUPER P6DLH/P6DLF User’s Manual
Power On/Off State
Refer to Table 2-16 on how to set JP26. Save Power Down (PD)
State is the default and is used when you want the system to be in
power off state the first time you apply power to the system or when
the system comes back from AC power failure. PIIX4 control is
used if you want the system to be in power on state the first time
you apply power to the system or when the system comes back
from AC power failure.
Table 2-16. Power On/Off State Pin Definitions
Connector J u m p e r
N u m b e r Position Function
JP26 1-2 PIIX4 Ctrl
2-3 Save PD State
SMI
Refer to Table 2-17 for instructions on how to use JP19. This
jumper should normally be set to 1-2 APIC SMI.
Table 2-17. SMI Pin Definitions
Connector J u m p e r
N u m b e r Position Function
JP19 1-2 APIC SMI
2-3 PIIX4 SMI