Supero Super 370SEA, User Manual

Page: 41 / 92

Chapter 2: Installation
2-13
Installation
2-8 Parallel Port, AMR, Floppy and Hard Disk Drive
Connections
Use the following information to connect the floppy and hard disk drive cables.
• The floppy disk drive cable has seven twisted wires.
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors to
provide for two floppy disk drives. The connector with twisted wires always
connects to drive A, and the connector that does not have twisted wires
always connects to drive B.
• The 80-wire ATA66 IDE hard disk drive cable that came with your system has
two connectors to support two drives. This special cable should be used to
take advantage of the speed this new technology offers. The blue connector
c o n n e c t s t o t h e o n b o a r d I D E c o n n e c t o r i n t e r f a c e a n d t h e o t h e r
connector(s) to your hard drive(s). Consult the documentation that came
with your disk drive for details on actual jumper locations and settings.
TV Out Mode
(370SED only)
The digital PC to TV circuitry inte-
grated into the 370SED includes an
NTSC/PAL encoder for both types
of TV formats. Select the mode
that corresponds to the format
used in your country. See Table
2-21 for jumper settings.
J u m p e r
Position
1-2
2-3
Definition
P A L M o d e
N T S C M o d e
Table 2-21
TV Out Mode
Jumper Settings
(JP7)
NTSC Countries: USA, Canada, Mexico, Japan, S. Korea
PAL Countries: Most of Europe, Australia, Hong Kong, Singapore, Thailand
(These listings are not all-inclusive.)