Supero Super 370SEA, User Manual

Page: 32 / 92

2-4
S
UPER 370SED/370SEA User's Manual
Installation
Top View of DIMM Slot
Figure 2-2. DIMM Installation
Note: Notches
should align
with the
receptive points
on the slot
D I M M S l o t
Side View of DIMM Installation into Slot
DIMM
P C 1 0 0
Notches
P C 1 0 0
Notches
2-4 Installing DIMMs
CAUTION
Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
DIMM Installation (See Figure 2-2)
1. Insert DIMMs in Bank 0 through Bank 1 as required for the desired system
memory.
2. Insert each DIMM module vertically into its slot. Pay attention to the
two notches along the bottom of the module to prevent inserting the
DIMM incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot.
4. If installing only a single DIMM, you may use either Bank 0 or 1.
To Remove:
Use your thumbs to
gently push near
the edge of both
ends of the module.
This should release
it from the slot.
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the two
notches.