2-7
Chapter 2: Installation Procedures
After you have installed the inner rails on the chassis, you are ready to
install the outer rails of rail assemblies to the rack.
(* The rails are designed to fit in the racks with the depth of 28" to
33".)
P r o c e d u r e s
1. In the package, locate a pair of front (-short) and rear (-long) brackets.
Please note that the brackets are marked with Up/Front Arrows (-front) and
Up/Rear arrows (-rear).
2. Secure the front (-short) bracket (marked with the Up/Front arrows) to
the outer rail with two Type G screws.
3
G
4
I
3. Attach the rear (-long) bracket to the other end of the outer rail and
secure the rear (long) bracket to the outer rail with a Type G screw as
shown below.
4. Measure the depth of your rack and adjust the length of the rails accord-
ingly.
5. Repeat the same steps install the other outer rail on the chassis.
6. Secure both outer rail assemblies to the rack with Type H screws and
Type I washers.
2
G
H
6
D-1 Rack Installation for the Traditional 1U Design
