Supero SC747TQ-R1400B, User Manual

Page: 31 / 80

5-9
Chapter 5: Chassis Setup and Maintenance
Place the hard drive to the hard drive tray. Make sure The hard drive can 4.
be SAS or SCSI depending on your motherboard. The hard drive may not
completely fill the tray.
Secure the hard drive to the carrier with four screws from the bottom. 5.
Slide the hard drive into the chassis until the carrier clicks into place. 6.
Repeat these steps for each hard drive carrier. 7.
Hard Drive
Hard Drive Tray
Figure 5-9: Adding a Hard Drive to the Drive Carrier