2-8
SC512 Chassis User’s Guide
A
E. Installing the Motherboard
Be sure to disconnect the power supply before accessing or installing the motherboard
into the chassis. (Refer to Chapter 1 for Safety Guidelines.)
Procedures
1. Lay the chassis on a fl at surface.
2. Locate the CPU location(s). If you have a UP system, be sure to install heatsink
brackets on the reverse side of the CPU. (Ignore this step if you have a DP sys-
tem.)
3. Lay the motherboard on the standoffs and secure it (with Mylar sheets, if any)
to the chassis with type A screws.
4. Secure CPU heatsink(s) to the motherboard. (*Refer to the next section for
heatsink installation.)
5. Install the air shroud(s) on the motherboard by inserting air shroud clips into the
corresponding holes.
3
4
(
**Note:
the CPU, heatsinks and the motherboard shown above are for refer-
ence only!! Both items are not included in the SC512 shipping package.)
Standoffs
