2-6
H8SMU User's Manual
Figure 2-2. Side and Top Views of DDR2 Installation
To Install:
Insert module vertically
and press down until it
snaps into place. The
release tabs should
close - if they do not
you should close them
yourself.
To Remove:
Use your thumbs to
gently push each re-
lease tab outward to
release the DIMM from
the slot.
Note: Notch
should align
with its
receptive point
on the slot
Notch
Notch
Release
Tab
Release
Tab
Note the notch in the slot and on the bottom of the DIMM.
These prevent the DIMM from being installed incorrectly.
Populating Memory Banks
for 128-bit Operation
DIMM1A
DIMM2A
DIMM1B
DIMM2B
X
X
X
X
X
X
Note:
X indicates a populated DIMM slot.
