manualshive.com logo in svg

Supero H8QGL-6F+, User Manual

Share
Download
Supero H8QGL-6F+ User Manual Download Page 62

4-4

H8QGL-6/iF+ SERVERBOARD USER'S MANUAL

Microcode Update

This setting 

enables

 or disables microcode updating. Options are 

Enabled

 or 

Disabled.

Secure Virtual Machine Mode

This setting allows you to 

enable

 or disable Secure Virtual Machine Mode (SVM) 

on your system. Options are 

Enabled

 or Disabled.

Power Now

This setting is used to 

enable

 or disable the AMD Power Now feature. Options 

are 

Enabled

 or Disabled.

Power Cap

This setting can decide the highest performance P-state in the Operating System. 

Options include 

P-state 0

, P-state 1, P-state 2, P-state 3 and P-state 4.

CPU DownCore Mode

This sets the CPU DownCore Mode for your system. If you change this option 

then a cold reset is required. Options include 

Disabled

, 1 Core, 2 Cores and 

3 Cores.

C1E Support

This enables or disables C1E Support for your system. Options are 

Enable

 or 

Disable.

Advanced Chipset Control

Chipset Information

Chipset Information is displayed at the top of this menu on the chipset CIMx version 

used.



NorthBridge Chipset Confi guration



Memory Confi guration

Bank Interleaving

This setting allows you to enable Bank Interleaving in the system. Options 

include 

Auto

 and Disabled.

Summary of Contents for H8QGL-6F+





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands