4-6
H8DMT+/H8DMT-INF+ User’s Manual
Clear NVRAM
Select Yes to clear NVRAM during boot-up. The options are Yes and
No
.
Plug & Play OS
Select Yes to allow the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select
No
to
allow AMIBIOS to confi gure all devices in the system.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value to
set the PCI latency in PCI clock cycles. Options are 32,
64
, 96, 128, 160, 192,
224 and 248.
Advanced Chipset Control
NorthBridge Confi guration
Memory Confi guration
Bank Interleaving
Select Auto to automatically enable a bank-interleaving memory scheme when this
function is supported by the processor. The options are
Auto
and Disabled.
Channel Interleaving
Selects the channel-interleaving memory scheme when this function is supported
by the processor. The options are Disabled, Address Bits 6, Address Bits 12,
XOR
of Address Bits [20:16, 6]
and XOR of Address Bits [20:16, 9].
Enable Clock to All Dimms
Use this setting to enable unused clocks to all DIMMSs, even if some DIMM slots
are unpopulated. Options are Enabled and
Disabled
.
Mem Clk Tristate C3/ALTVID
Use this setting to Enable or
Disable
memory clock tristate during C3 and ALT
VID.
Memory Hole Remapping
When "Enabled", this feature enables hardware memory remapping around the
memory hole. Options are
Enabled
and Disabled.
Summary of Contents for H8DMT+
Page 1: ...H8DMT H8DMT INF USER S MANUAL Revision 1 0a SUPER...
Page 37: ...Chapter 2 Installation 2 19 Figure 2 4 Driver Tool Installation Display Screen...
Page 38: ...H8DMT H8DMT INF User s Manual 2 20 Notes...
Page 58: ...4 16 H8DMT H8DMT INF User s Manual Notes...
