Supero H8DMT+, User Manual

Page: 27 / 68

Chapter 2: Installation
2-9
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB
2.0) are located beside the LAN1/2
ports. Two additional ports (USB4/5)
are included on the motherboard near
the SIMSO slot. See the table on the
right for pin defi nitions.
Universal Serial Bus Ports
Pin Defi nitions (USB0/1, USB4/5)
USB0
Pin # Defi nition USB1
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
USB Headers
Two USB 2.0 headers (USB2/3) are
also included on the motherboard.
These may be connected to provide
front side access. A USB cable (not
included) is needed for the connec-
tion. See the table on the right for pin
defi nitions.
Universal Serial Bus Headers
Pin Defi nitions (USB2/3)
USB2
Pin # Defi nition USB3/4
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 No connection
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# Defi nition
19 Control
20 Ground
Power I 2 C
The JPI
2
C header is for power I
2
C,
which may be used to monitor the
status of the power supply, fan and
system temperature. See the table on
the right for pin defi nitions.
Power I
2
C
Pin Defi nitions (JPI 2 C)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 NC