Supero FatTwin F517H6-FT, User Manual, Page: 127 / 130

B-1
Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
There are four motherboard drawer nodes per system.
Processors
One E3-1200 series processor per node in a Socket H2 (LGA 1155) type socket
Note: please refer to our website for details on supported processors.
Chipset
One C204 chipset per node
BIOS
64 Mb AMI BIOS® Flash EEPROM per node
Memory Capacity
The X9SCFF-F serverboard has four (4) DIMM slots supporting up
to 32 GB of UDIMM DDR3-1600/1333 MHz speed SDRAM in up to
1 GB, 2 GB, 4 GB or 8 GB sizes at 1.5V voltage per node.
Note: refer to Section 5-5 for details on installation.
Note: Check the Supermicro website ( www.supermicro.com ) for the latest memory support
information.
SAS/SATA Drive Bays
Each of the FatTwin F517H6-FT nodes contains twelve (12) fi xed internal drive
trays to house twelve standard 3.5" SATA drives with two (2) fi xed 2.5" internal
drive trays available for 2.5" SATA drives.
PCI Expansion
The FatTwin F517H6-FT has 1x PCI-E 3.0 x8 low-profi le slot available per node.
Serverboard
FatTwin X9SCFF-F serverboard (proprietary form factor)
Dimensions: (LxW) 18.72" x 8.54" (475.49 mm x 216.92 mm)