Supero C7Z370-CG-IW, User Manual

Page: 115 / 142

Chapter 4: AMI BIOS
4-47
Hot Plug
This feature designates the port specified for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Disabled or Enabled.
Configured as eSATA
This feature dispays the eSATA status for the detected hard drive.
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The options are
Disabled or Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the SATA
port. The options are
Hard Disk Drive or Solid State Drive.
PCH-FW Configuration
The following information for the PCH Firmware is displayed:
•
ME Firmware Version
•
ME Firmware Mode