Supero C7Z370-CG-IW, User Manual

Page: 111 / 142

Chapter 4: AMI BIOS
4-43
IMON Slope
IMON (Load Current Monitor) Slope is defined in 1/100 increments
and uses the BIOS VR mailbox command 0x4. Range is 0-200. For
example, enter 125 for a 1.25 slope. Enter
0 for AUTO .
IMON Offset
IMON Offset is defined in 1/1000 increments and uses the BIOS VR
mailbox command 0x4. For example, enter 25,348 for a 25.348 offset.
Range is 0-63999. The default value is
0 .
IMON Prefix
This feature sets the IMON offset value to a positive (+) or negative
(-) number. The default setting is
"+" .
VR Current Limit
This feature sets the Voltage Regulator current limit. The value repre-
sents the maximum instantaneous current allowed at any given time.
The value is represented in 1/4A (Ampere) increments. A value of 400
equals 100A. Set this number to
0 for Auto . This uses the BIOS VR
mailbox command 0x6.
VR Voltage Limit
This feature sets the Voltage Regulator voltage limit. The value is
represented in mV. A value of 1250 equals 1.25V. Set this number to
0 for Auto . This uses the BIOS VR mailbox command 0x6.
TDC Enable
Use this feature to enable or disable Thermal Design Current (TDC).
The options are
Disabled or Enabled.
TDC Lock
Use this feature to enable or disable TDC Lock. The options are Dis-
abled or Enabled .