Supero C7Z170-SQ User Manual Download Page 111

Page: 111 / 155

Chapter 4: AMI BIOS

4-35

Boot Mode Select

This option sets the boot mode between Legacy BIOS, UEFI BIOS or
Dual. The options are Dual,

Legacy

and UEFI.

Legacy Boot Order #1~#7

This option sets the order of which the system boots from the installed
boot devices. The options and defaults are dependent on the boot de-
vices detected.

Delete Driver Option

Use this option to delete and EFI driver from the boot order.

NETWORK Drive BBS Priorities

Use this option to specify the boot device priority sequence from avail-
able network drives.

BIOS Features

Setup Prompt Timeout

This feature sets the length of time the BIOS waits for the <del> key to
be pressed by the user when entering setup. Enter a value in seconds.

Bootup Numlock State

This option sets the state to which the NumLock key is configured when

booting. The options are

Enabled

and Disabled.

Summary of Contents for C7Z170-SQ




























































































































































Search results

Summary of Contents for C7Z170-SQ

Reviews:

Related manuals for C7Z170-SQ

Brands by name

Popular brands

Supero C7Z170-SQ, User Manual

Search results

Summary of Contents for C7Z170-SQ

Reviews:

Related manuals for C7Z170-SQ

Brands by name

Popular brands