6-8
AS1041M-T2+ User's Manual
Removing the Power Supply
First unplug the power cord from the failed power supply module.
Push the release tab (on the back of the power supply) to the right and then
pull the module straight out (see Figure 6-5).
The power supply wiring was designed to detach automatically when the
module is pulled from the chassis.
Installing the Power Supply
Replace the failed power module with another PWS-1K01-1R power supply
module.
Push the new power supply module into the power bay until you hear a click.
Finish by plugging the AC power cord back into the module and powering up
the system by depressing the power on/off button.
1.
2.
3.
1.
2.
3.
Figure 6-5. Removing/Replacing the Power Supply
Summary of Contents for AS-1041M-T2 Plus
