3-5
Chapter 3: Installation
Installing 10G Drivers for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > ConnectX_EN > Windows.
2.
Choose the desired 10G Windows driver package file.
3.
Double-click to run and install the driver package file.
Firmware Update Procedures
Use the following procedures for updating the AOC-UIBF-m1 add-on card firmware
for both the Linux and Windows operating systems.
Updating Firmware for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Linux.
2. Choose the
MFT Linux
package file and untar the package file.
3. Install the package by entering the following command:
cd mft–<ver>
./install.sh
4.
Install the firmware by the following commands:
mst start
mst status *write down the pci_cr0 device name*
flint –d <pci_cr0 device name> –i <firmware file name>.bin b
Updating Firmware for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Windows
2.
Choose the desired MFT Windows package file.
3.
Double-click to run and install the MFT package file.
