Supero A+ Server 4022G-6F, User Manual, Page: 87 / 122

Chapter 6: Advanced Chassis Setup
6-7
Drive Rails
Drive Tray
Figure 6-5. Removing Rails from the Drive Tray
Adding Peripheral Drives to the Drive Bays
Replace a drive tray with a peripheral drive.
1. Open the chassis cover.
2. Locate the release tab for the drive tray where you want to place the peripheral
drive (Figure 6-4).
3. Push the drive tray toward the front of the chassis.
4. Remove the rails from the drive tray by removing two screws from each side.
(Figure 6-5)
5. Attach the rails to a DVD drive, CD drive, floppy drive, or other peripheral. The
rails should fit any standard sized peripheral.
6. Slide the drive into the chassis until it clicks into place.