5-12
S
UPER
S
ERVER 5037MC-H12TRF User's Manual
5-9 Connector
Defi nitions
IF + POWER
This edge connector, located on the opposite end of the motherboard from the I/O
back panel, is used to connect the motherboard to the backplane of the server
chassis. Through this connector, the motherboard will receive its power and com-
municate with the rest of the system (hard drives, warning lamps, etc).
SATA DOM Power
The SATA DOM Power header on JSD1
is used to supply power to SATA Disk-
on-Module (DOM) solid-state storage
devices. See the table on the right for
pin defi nitions.
DOM PWR
Pin Defi nitions
Pin# Defi nition
1
+5V
2
Ground
3
Ground
Internal Speaker
The internal speaker/buzzer, located at
SPKR1, can be used to provide audible
indications for various beep codes. See
the table on the right for pin defi nitions.
Internal Buzzer (SP1)
Pin Defi nition
Pin# Defi nitions
Pin 1
Pos. (+)
Beep In
Pin 2
Neg. (-)
Alarm
Speaker
Summary of Contents for 5037MC-H12TRF
