Supero 2027TR-H70FRF User Manual Download Page 101

Page: 101 / 120

Chapter 7: BIOS

7-13



SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of IDE or SATA devices and displays the following items.

SATA Port0~SATA Port5

The AMI BIOS displays the status of each SATA port

as detected by the BIOS.

SATA Mode

Use this feature to confi gure SATA mode for a selected SATA port. The options are

Disabled, IDE Mode,

AHCI Mode

and RAID Mode. The following are displayed

depending on your selection:

IDE Mode

The following items are displayed when IDE Mode is selected:

Serial-ATA (SATA) Controller 0~1

Use this feature to activate or deactivate the SATA controller, and set the

compatibility mode. The options for Controller 0 are Enhanced and

Compatible.

The default of SATA Controller 1 is

Enhanced

AHCI Mode

The following items are displayed when the AHCI Mode is selected.

Aggressive Link Power Management

Select Enabled to enable Aggressive Link Power Management support for Cougar

Point B0 stepping and beyond. The options are

Enabled

and Disabled.

Port 0~5 Hot Plug

Select Enabled to enable hot-plug support for a particular port, which will allow the

user to change a hardware component or device without shutting down the system.

The options are Enabled and

Disabled

Staggered Spin Up

Select Enabled to enable Staggered Spin-up support to prevent excessive power

consumption caused by multiple HDDs spinning-up simultaneously. The options

are Enabled and

Disabled

RAID Mode

The following items are displayed when RAID Mode is selected:

Summary of Contents for 2027TR-H70FRF

























































































































Search results

Summary of Contents for 2027TR-H70FRF

Reviews:

Related manuals for 2027TR-H70FRF

Brands by name

Popular brands

Supero 2027TR-H70FRF, User Manual

Search results

Summary of Contents for 2027TR-H70FRF

Reviews:

Related manuals for 2027TR-H70FRF

Brands by name

Popular brands