Supero 2027R-N3RF4+, User Manual

Page: 11 / 110

1-3
Chapter 1: Introduction
Graphics Controller
The X9DRW-3LN4F+/X9DRW-3TF+ features an integrated G200 (Renesas SH7757
BMC) graphics chip.
1-3 Server Chassis Features
The 2027R-N3RF4+/2027R-N3RFT+ is built upon the SC219A-R920WB chassis.
Details on the chassis and on servicing procedures can be found in Chapter 6.The
following is a general outline of the main features of the chassis.
System Power
The SC219A-R920WB features a redundant 920W power supply consisting of two
power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
Hard Drives
The SC219A-R920WB chassis was designed to support 16 hot-swappable 2.5"
SAS or SATA hard drives.
PCI Expansion Slots
Four standard size and two low-profile add-on cards are accommodated by the
chassis.
Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan failure and
power failure. A main power button and a reset button is also included on the
control panel.
Cooling System
The SC219A-R920WB has an innovative cooling design that features four 8-cm
fans located in the middle section of the chassis. There is a "Fan Speed Control
Mode" setting in BIOS that allows chassis fan speed to be determined by system
temperature.