background image

2 /

/ 3

SAFETY PRECAUTIONS

When using electrical appliances, especially when children are present, basic safety precautions should 
always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM 
WATER. DANGER: As with most electrical appliances, electrical parts are electrically live even when the 
switch is off. To reduce the risk of electric shock:

•  Do not reach for an appliance that has fallen into water. Unplug it immediately.
•  Do not use in wet locations.
•  Do not place or drop into water or other liquid.
•  Do not place or store this appliance where it can be pulled into a tray, reservoir, or sink.
•  Always unplug this appliance from the electrical outlet when not in use.
•  This appliance is for household use only.
•  Close supervision is necessary when this appliance is used by, on, or near children or persons with 

special needs.

•  Use this appliance only for its intended use as described in this manual. Do not use attachments not 

recommended by the manufacturer.

•  Keep the cord away from heated surfaces.
•  Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped or damaged, or if it has been dropped into water.

•  Never drop or insert any object into any of the appliance’s openings.
•  Do not use outdoors or operate where flammable (spray) products are being used, or where oxygen 

is being administered.

•  Always store this appliance and cord in a moisture-free area.
•  Do not plug or unplug this appliance when your hands are wet.
•  Do not use in countries with 220/240 volt electrical systems; use only with 110/120 volt electrical 

systems.

•  Connect this appliance to a properly grounded outlet only.
•  A GFCI is always recommended. GFCIs are generally installed where electrical circuits may accidentally 

come into contact with water. They are most often found in kitchens, bath and laundry rooms, grow 
rooms, out-of-doors or in the garage where electric power tools might be used.

ALCI Safety Device

:

 This blower is provided with an appliance leakage circuit interrupter (ALCI) safety 

device built into the plug. This device is designed to make the unit inoperable under some abnormal 
conditions, such as accidental immersion in water. The ALCI safety device is equipped with a test button so 
that its operation can be checked.

This unit should be tested before each use to confirm that the safety device is operational. To test: After 
plugging in.

1. 

Press the reset button on the ALCI device. 

2. 

Press the test button. The reset button will pop out. This verifies that the safety device is operating 
properly.

3. 

Press the reset button to reactivate your ALCI safety device.

4. 

Your blower is now ready for use.  

Note: This unit may automatically trip when unplugged. If so, the unit must be reset after it is plugged in.

5. 

Should the ALCI safety device trip (i.e., reset button pops out) during use, press the reset button. 
Never operate this appliance if it has been dropped in water.

6. 

The blower is designed to work on ordinary household current only, 125 volts A.C., 60 Hz. It is not 
intended for commercial use.

7. 

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will 
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still 
does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

8. 

Always remove the blower motor from the manifold/injector before attaching or disconnecting 
the manifold/injector from the Turbo Grow. Never fill the manifold/injector with liquid or turn the 
manifold/injector upside down with the blower motor attached as liquid from the Turbo Grow may 
enter the blower motor.

PARTS LIST

1. 

Manifold/Injector.

2. 

Shuttle Valve.

3. 

5 x 

3

4

 inch Rubber Grommets (one spare).

4. 

Drain Hose and Valve.

5. 

Blower Adapter Fitting.

6. 

Nutrient Cap.

7. 

1 x 1-inch Rubber Grommet.

8. 

¾ inch 90° Angled Barbed Fitting.

9. 

Safety Cord.

10. 

¾ inch Straight Barbed Fitting.

11. 

Filter/Diffuser.

12. 

1 Measuring Scoop (30 mL for 38 L Turbo Grow) & (60 mL for 165 L Turbo Grow)

13. 

Blower with ALCI.

14. 

Super Boost, Gro Terra, Bloom Terra.

a. 

Super Boost 11-49-9, for rooting and transplanting, 14.1 OZ (400 g)

b. 

Gro Terra 20-20-20, for the vegetative growth stage, 14.1 OZ (400 g)

c. 

Bloom Terra 15-31-14, for the flowering stage, 14.1 OZ (400 g)

1

2

3

4

5

6

7

10

9

8

12

11

13

14.a

14.b

14.c

Summary of Contents for TURBO GROW






Reviews: