manualshive.com logo in svg

Supermicro X7DB3, User Manual

Share
Download
Supermicro X7DB3 User Manual Download Page 84

4-26

             X7DB3 User's Manual

4-7 Exit

Choose Exit from the Phoenix BIOS Setup Utility main menu with the arrow keys.  You 
should see the following display.  All Exit settings are described in this section.

Exit Saving Changes

Highlight this item and hit <Enter> to save any changes you've made and to exit 
the BIOS Setup utility.

Exit Discarding Changes

Highlight this item and hit <Enter> to exit the BIOS Setup utility without saving any 
changes you may have made.

Load Setup Defaults

Highlight this item and hit <Enter> to load the default settings for all items in the 
BIOS Setup.  These are the safest settings to use.

Discard Changes

Highlight this item and hit <Enter> to discard (cancel) any changes you've made.  
You will remain in the Setup utility.

Save Changes

Highlight this item and hit <Enter> to save any changes you made.  You will remain 
in the Setup utility.

Summary of Contents for X7DB3






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands