manualshive.com logo in svg

Supermicro X7DB3, User Manual

Share
Download
Supermicro X7DB3 User Manual Download Page 7

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged 
leader in the industry. Supermicro boards are designed with the utmost attention to 
detail to provide you with the highest standards in quality and performance. Check 
that the following items have all been included with your motherboard. If anything 
listed here is damaged or missing, contact your retailer. 

All the following items are included in the retail box.

 One (1) Super Micro Mainboard

• 

 One (1) ribbon cable for IDE devices (CBL-036L-02)

• 

 One (1) Serial Port cable (CBL-010L-01)  

• 

 One (1) USB cable (CBL-083)

• 

 One  (1) 

fl

 oppy ribbon cable (CBL-022L) 

• 

 Two (2) SAS cable (CBL-097L-01)

• 

 Four (4) SATA cables (CBL-044L)

• 

 One (1) I/O backpanel shield (CSE-PT07L)

• 

 One (1) Super Micro CD containing drivers and utilities (CDR-X7)

• 

 One (1) User's/BIOS Manual

• 

Summary of Contents for X7DB3






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands