Supermicro X5DPR-TG2 Plus, User Manual

Page: 12 / 110

1-6
Introduction
SUPER X5DPR-TG2+ User's Manual
Motherboard Features
CPU
• Single or dual Intel
®
604 and 603-pin Xeon
TM
processors at a 533/400
MHz front side (system) bus speed.
Note: Please refer
to the support section of our web site for a complete listing of supported processors (http://
www.supermicro.com/TechSupport.htm).
M e m o r y
• X5DPR-TG2+: Six 184-pin DIMM sockets supporting up to 12 GB of
registered ECC DDR-266/200 SDRAM
Note: Interleaved memory; requires memory modules to be installed in pairs. DDR-266 memory
must be used with 533 MHz FSB speed processors. See Section 2-3 for details.
Chipset
• Intel E7501 chipset
Expansion Slots
• One 64-bit, 133 MHz PCI-X (SXB)
• One slim 64-bit, 66 MHz PCI
BIOS
• 4 Mb Phoenix
®
Flash ROM
• APM 1.2, DMI 2.1, PCI 2.2, ACPI 1.0, Plug and Play (PnP), SMBIOS 2.3
PC Health Monitoring
• Onboard voltage monitors for CPU cores, chipset voltage, 3.3V, +5V,
+
12V and 3.3V standby
• Fan status monitor with firmware/software on/off control
• CPU/chassis temperature monitors
• Environmental temperature monitor and control
• CPU fan auto-off in sleep mode
• CPU slow-down on temperature overheat
• CPU overheat LED header
• Power-up mode control for recovery from AC power loss
• Auto-switching voltage regulator for CPU core
• System overheat LED and control
• Chassis intrusion detection
• System resource alert