Supermicro X5DPA-G, User Manual, Page: 66 / 80

4-16
S
UPER X5DPA-G/X5DPA-GG User’s Manual
Serial Port Number
Select the serial port you want to use for console redirection. You can set
the value for this option to either "
COM1 " or "COM2".
Serial Port Mode
Select the baud rate you want the serial port to use for console redirection.
Select "115200 8,n,1" to select 115200 as the baud rate (transmitted bits
per second) of the serial port. Select "57600 8,n,1" to set 57600 as the
baud rate (transmitted bits per second) of the serial port. Select "19200
8,n,1" to set 19200 as the baud rate (transmitted bits per second) of the
serial port. The default setting is "
115200 8,n,1 ".
Flow Control
Select the flow control for console redirection. You can set the value for
this option to either "
None " or "Hardware".
Terminal Type
This feature allows you to select the target terminal type. You can set the
value for this option to either "
ANSI " or "VT100".
Send Carriage Return
Select "Enabled" if the target terminal type has more than 80 columns or
does not have the function of "Word Wrap". The options are "Enabled" and
"
Disabled ".
Redirection After BIOS POST
Select "Disabled" to turn off the function of Console Redirection after POST.
Select "Boot Loader" to keep the function of Redirection active during POST
and during Boot Load. Select "Always" to keep the function of "Redirection"
active all the time. If "Always" is selected, some operating systems might
not function well The default setting is "
Boot Loader ".
X
Hardware Health Monitoring
H/W Health Function
Select "Enabled" to enable the function of Hardware Health Monitoring
Device. The Options are "
Enabled " and "Disabled".
Overheat Temperature Trips
The feature allows the user to set the CPU temperature threshold. The
options are "72
o
C
", "
78
o
C " and "85
o
C.